Strong-DriveŽ SD Screw for Structural Connectors
Simpson SD Structural Connector ScrewFeatures:
  • Specifically designed to replace nails in certain Simpson Strong-TieŽ connectors, and is the only screw approved for that application. The #9 and #10 SD screws replace 10d and 16d nails respectively.
     
  • Tested and approved for use in many of our best-selling connectors for both interior and most exterior applications.*
    * See list of suitable connectors.
    
  • Ideal for use in connector applications where more control is desired or using a hammer is inconvenient.
     
  • 1/4" hex head reduces cam-out for easier installation and is stamped with the Simpson Strong-Tie "≠" sign and the fastener size for easy identification after installation
     
  • Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
     
  • Patented serrated threads and sharp point make driving easier
     
  • Optimized heat treating for ductility and strength
     
  • The single-fastener load capacity of the SD9 exceeds the capacity of a 10d common nail, while the single-fastener load capacity of the SD10 exceeds that of the 16d common nail
     
  • Mechanically-galvanized coating meets ASTM B695 Class 55, is recommended for use with certain preservative-treated woods and is compliant with the 2006 and 2009 International Residential CodeŽ (2006 Section R319.3, 2009 Section R317.3.1)
     
  • Connectors installed with the SD screw code listed under ICC-ES ESR-3096

  • Material: Heat-treated carbon steel.

    Finish: Mechanically galvanized (ASTM Class 55)

    Head Identification

    		      
    SD 9015 SD 9015 SD 9015 SD 9015  
    #9 x 1 1/2" #9 x 2 1/2" #10 x 1 1/2" #10 x 2 1/2"  
Available in 100, 500 and Bulk Packs
Simpson Strongtie SD - PDF Brochure
Strong-Drive® SD Screw for Structural Connector

BOX OF 100
Strong-Drive® SD Screw for Structural Connector

BOX OF 500

Quantity
 

Quantity
 
Strong-Drive® SD Screw for Structural Connector

Bulk Pack
 
3000 Pieces   2000 Pieces
#9 x 1 1/2"   #9 x 2 1/2"
#10 x 1 1/2"   #10 x 2 1/2"
 
 

Quantity