|
 |
Level Tension Fitting |
|
Level Non-Tension Fitting |
|
|
|
Stair Non-Tension Fitting |
|
|
Stair Tension Fitting |
|
|
Installation Steps |
1. Drill Posts for either cable fitting (7/32") or cable pass-through (5/16") |
2. Install Tensioning and Non-Tensioning Fitting Lags into end posts |
3. Measure and cut Cable runs to length |
4. Insert cable into Non-Tension fitting |
5. Feed cable through intermediate posts and insert into Tension Fitting |
6. Tension cable runs staring in the middle and working up & down |
|
HELPFUL HINTS: |
Use Cable Brace as guide for drilling holes. |
Purchase a PL-Key in case you need to release the cable from the fitting. |
|
Installation Instructions |
|
|
Typically there are 10 cable rows for 36" Rail Height, 12 rows for 42" Rail Height based on 3 1/8" On Center spacing |
Composite Fittings have longer lags to extend though the post sleeve into the wood post. |
Cable Braces are needed for spans larger than 60" |
1/8" Stainless Steel Cable Fittings |
Level Rail Non-Tension Fittings |
Level Rail Tension Fittings |
Stair Rail Non-Tension Fittings |
Stair Rail Tension Fittings |
For Wood Posts - $18.00 |
For Wood Posts - $26.80 |
For Wood Posts - $26.80 |
For Wood Posts - $32.47 |
For Composite Posts - $19.80 |
For Composite Posts - $29.47 |
For Composite Posts - $29.47 |
For Composite Posts - $37.67 |
|
|
|
|
|
3/16" Stainless Steel Cable Fittings |
Level Rail Non-Tension Fittings |
Level Rail Tension Fittings |
Stair Rail Non-Tension Fittings |
Stair Rail Tension Fittings |
For Wood Posts - $20.20 |
For Wood Posts - $29.33 |
For Wood Posts - $30.93 |
For Wood Posts - $36.87 |
For Composite Posts - $22.20 |
For Composite Posts - $32.07 |
For Composite Posts - $34.60 |
For Composite Posts - $40.20 |
|
|
|
|
|
100' x 1/8" Cable |
500' x 1/8" Cable |
100' x 3/16" Cable |
500' x 3/16" Cable |
$57.60 |
$288 |
$97.87 |
$489.33 |
|
|
|
|
|
|
|
|